Artistic border to an image

Artistic border to an image

  1. Open a one-layer document, then click the Background on the Layers panel.
  2. Choose the Rectangular Marquee tool (M or Shift-M), then draw a selection marquee. Position the marquee where you want the border to be.
  3. On the Options bar, click Refine Edge.
  4. In the Refine Edge dialog, choose On White view (W), then adjust the Radius,Smooth,Contrast, and Shift Edge values to roughen the edges.
  5. From the Output To menu, choose New Layer with Layer Mask, then click OK.
  6. Click the Background, then press Shift-Backspace/Shift-Delete. In the Fill dialog, choose Use: White, Mode: Normal, and Opacity: 100%, then click OK.

Just check your image it was so easy.

Creating Downloading Icon

Creating Downloading Icon

Step 1

create a document in Photoshopwith an dimensions of 600 x 400 px. Fill the background colour with #f0e9dd.

Step 2

Select Ellipse tool (U). Create a nice circle with the size you like.
Next, select the pen tool (P). Ctrl + click on the circle you just made. This should make the anchor points of the object show.
Again ctrl + click, but now only on the lower anchor point. You should see this now:

Circle

Step 3

With that anchor point selected, hold shift and press your down arrow twice. This should drop the point 20px down. There it is, the sort of upside down egg shape.

Let’s style that thing up!
All there is on there is:

· Gradient Overlay

· Inner shadow

· Stroke

Settings below:

2

 

3

 

4

 

Step 4

Next lets make a small shape on the bottom of of main shape as shown in the below.

I have used the pen tool (P) . next use some layer styles.

  1.  Drop Shadow
    1. Blend Mode : Normal, Color #5C5C5C
    2. Angle : 90 Degrees
    3. Distance : 1 Px
  2. Inner Shadow
    1. Blend Mode : Multiply, Color #202020
    2. Opacity : 50%
    3. Distance : 2 Px
  3. Color overlay
    1. Blend Mode : Normal, Color #202020.

Now the image looks like same below.

6

7

8

Step 5

Lets create an  inside of the colored circle.

  1. Drop Shadow
    1. Blend Mode : Normal Color (#FFFFFF)
    2. Opacity 40%
  2. Inner Shadow
    1. Blend Mode   :Normal Color (#000000)
    2. Opacity   : 40%
  3. Inner Glow
    1. Opacity   : 15%
    2. Color    : #000000
  4. Gradient Overlay
    1. Overlay colors from #515151 to #393939

Like this:

9

 

Step 6

We’ll be adding text to this later.

Now it’s time for the orange loading bar. I guess there are more ways to make this. But I took the easiest approach. First, create an Ellipse again. about 10px larger than the one above. Make sure the layer is set beneath the dark ellipse and above the main shape.

Now we’re gonna modify this shape a bit with the pen tool by adding some anchor points and curving some lines. Try to make it like this:
10

This shape has 5 added layer styles, and next to that some lighting layers above which we will get to after this.

Layer styles:

  1. Drop Shadow
    1. Blend Mode :  Normal color (#000000)
    2. Opacity 55%
  2. Inner Shadow
    1. Blend Mode Hard light  : Color (#FFFFFF)
    2. Opacity  :  35%
  3. Inner Glow
    1. Blend Mode : Overlay
    2. Opacity   : 30%
    3. Color   :FFFFBE
    4. Size :  10Px
  4. Color Overlay
    1. Color : #FF7E00
  5. Stroke (with gradient)
    1. Size  : 1Px
    2. Position  : Outside
    3. Opacity   :  55%
    4. Fill type :  gradient (colors from #353535 to #494949

It should be like this
11

Step 7

Now, make a new layer, (ctrl-shift+N) and ctrl click on the orange shape layer thumbnail. This should bring up a selection.

Put the new layer selected on Blending mode Soft light, grab the brush tool with about a 40px radius and white colour and start playing around to make some highlights on the orange circle.

Than, again a new layer. Still with the selection of the orange circle. Again on soft light, pull down the opacity to about 60-70% and pull a standard black-white gradient from top to bottom.

Now you should have something like this:
12

Step 8

Load the selection of the orange layer again (ctrl+click on the layer thumbnail). Rasterize the new shape we made and hit delete. This should delete all of the overlapping on the orange. Doe the same thing again, but now load the selection of the inner dark circle. So you only have the visible of the circle left. (The one-quarter piece). Let’s give it some styling.

  1. Drop Shadow
    1. Blend mode : Normal , Color #484848
    2. Angle 120°
  2. Inner Shadow
    1. Blend Mode Multyply, Color (#000000)
    2. Opacity  : 75%
    3. Angle : 90 °
  3. Gradient Overlay
    1. Colors From #000000 to #575757

13

 

Few things left to do.

  • Add the numbers in the middle.
  • Highlights on all the shapes.
  • Simple background shadow

Grab the text tool, with the Open Sans font, typ 75% in the middle on everything (16px, bold #ddd3c3). Give the text a drop shadow, deselect the Global lighting option and set the direction to -90 degreesdistance: 1, spread: 0, size: 0. Colour: #000.

Another text layer beneath the percentage. This will show the file size, or download speed. Whatever you like. Same styling same options, only not bold and 10px big now.

All set, now we have this:
14

Download the original PSD file here

How to Aligning and Distributing Layer Content

How to Aligning and Distributing Layer Content

 

The Move Tool has align and distribute functions in its tool options. These are useful for aligning and distributing the position of content on multiple layers in relation to each other or in relation to a selection.

Aligning Layer Content

Align and distribute only work on pixels with an opacity greater than 50%. If an object like the gradient circle from the last lecture was used, Photoshop would only consider the center areas of the circle in deciding where to position the object. There are 12 buttons in the Tool Options bar for aligning and distributing. We’ll start with the align function which uses the six buttons on the left.

If you’ve had experience with a word-processing application, you’ve probably aligned text so it’s left-aligned, center-aligned or right-aligned in relation to the margin. Photoshop alignment works in much the same way. In order to use the alignment function, the objects you want to align must be on separate layers and a minimum of two layers must be linked or selected. If the active layer isn’t linked to any other layers and no other layers are selected, the align options will be greyed out

.

The icon on each button is a visual representation of what the button will do. Admittedly, the icons can be confusing until you get used to them. If you have tool tips enabled, holding your mouse over a button will display its function. The first set of three buttons is for vertical alignment. The second set is for horizontal alignment.

The steps for aligning are:

  1. Make sure the active layer is linked to other layers that contain the content you want to align. Alternately, select two or more layers at the same time. To select contiguous layers, select two or more while holding down the Shift key. To select non-contiguous layers, hold down the Ctrl(Cmd) key as you’re clicking layers to add them to the selection.
  2. Select the Move tool.
  3. Click on one of the alignment buttons.

The table below shows three objects on separate layers that are linked. The top image shows how they were positioned to begin with. Each of the following six images shows how they would align in relation to their starting positions. The red lines were drawn in to show the edges or centres that serve as the alignment point.

Alignment Options
Original Layer Positions
Vertical
Top Edges Vertical Centres Bottom Edges
Horizontal
Left Edges Horizontal Centres Right Edges

The Active Layer is the Boss

The active layer’s contents will affect the outcome of aligning. For example, in the Left Edges example above, the pink rectangle was on the active layer. When the alignment was applied, the other two objects aligned to the left edge of the pink rectangle. Switching now to the table below, the first of the three images shows the same thing. The second and third images show what happens if the active layer contains the green object or the blue object.

Aligning to the Active Layer
Original Layer Positions
Left Alignment
(The red arrow points to the active layer.)

Aligning to a Selection

The other option for aligning is aligning to a selection border. If a selection has been made in the image, clicking on an alignment button will align the objects to the selection, rather than to the object on the active layer. In this example, Align Left Edges was used. The result was that the left edge of each coloured object was aligned to the left edge of the selection. When aligning to a selection, you can align a single layer.

Menu Commands for Aligning

 

All of the Alignment options are available in the Layer > Align submenu. The Move tool doesn’t have to be selected when using the menu commands.

Distributing Layer Content

The distribute function inserts an equal amount of space between the designated edges or centres of objects on three or more layers. Objects on the middle layer(s) are moved in order to accomplish this. Like aligning, objects must be on separate, linked (or selected) layers. The distribute buttons are the six on the right side of the Tool Options bar.

The procedure for distributing is exactly the same as it is for aligning. However, it doesn’t matter which layer is the active layer when distributing. The results will be the same. The presence of a selection marquee doesn’t affect the results.

Distribute Options
Original Layer Positions
Vertical
Top Edges Vertical Centres Bottom Edges
Horizontal
Left Edges Horizontal Centres Right Edges

In the examples above, the red, two-headed arrows show how the amount of spacing is equal between the alignment points of each pair of objects. The pink and blue objects remain in their fixed positions. The green object in the middle is shifted around to create the proper alignment.

How to Align and Distributing Layer Content

How to Align and Distributing Layer Content

A useful example of the distribute function is when setting up text on separate layers to create a graphical menu for a web page. Once you create the text layers, you’ll want to align them. You’ll also want to have an equal amount of vertical spacing between each menu item. The example to the right shows a vertical menu that has been left-aligned (1) and then distributed (2).

If you were to measure the distance between the vertical centres of each pair of text items, they would be identical. Keep in mind that only the middle item(s) will be shifted to assign equal spacing between all items. In the text example, the top and bottom text didn’t move during distribution. If you want less overall space between items, you’ll have to move the top and bottom text closer together before applying the distribute function.

Menu Commands for Distributing

All of the distribute options are available in the Layer > Distribute submenu. The Move tool doesn’t have to be selected when using the menu commands.

Aligning and Distributing Layer Content Summary

  • The Move tool has align and distribute functions that are accessed through 12 buttons in the Tool Options bar.
  • Objects can be aligned in relation to each other or in relation to a selection marquee. Objects are only distributed in relation to each other.
  • Only pixels with an opacity value greater than 50% will be considered for the purposes of aligning and distributing.
  • Objects must be on separate layers that are either linked or selected in order to use these functions.
  • There must be at least two linked or selected layers to use the align function. When aligning to a selection border, a single layer can be used.
  • There must be at least three linked or selected layers to allow distributing.
  • When aligning, objects will be aligned to the object on the active layer unless you’re aligning to a selection. It makes no difference which layer is active when distributing as long as it’s one of the linked or selected layers.
  • If you use menu commands to align or distribute, the Move tool doesn’t need to be active.

Creating animated Melted text in Photoshop

Creating animated Melted text in Photoshop

Step 1

Create a new document in Adobe Photoshop with an dimensions of 500 X 500 Pixels.

Step 2

Fill the background colour with Black (#000000).

Image with Black background

Image with Black background

Step 3

Create a text by using Text Tool for melting effect here i am taking the text as Melting text, with an text color of White (#FFFFFF).

Image with Black background and white text

Image with Black background and white text

Step 4

Now go to blending options shown at bottom of layers panel and select Bevel & Emboss options.

Bevel And emboss Options

Bevel And emboss Options

 

Step 5

Now Rasterize   Right click on the text layer and select Rasterize select ok.

Step 6

Duplicate the text layer by pressing Ctrl+J Now Apply the filter Filter > Liquify (Shift + Ctrl +X) now drag on text it will be blurred.

Image with Black background and white text

Image with Black background and white text

Step 7

Repeat the step 6 until the text totally blurred.

Image with Black background and white text

Image with Black background and white text

Now open Animation Window > Animation now duplicate animation Frames duplicate layers that as many layers you have created in step 6.

Step 8

Duplicate the Animation layers as many as duplicated layers created in step 6.

Step 9

Now select frame1 & then Hide the all Layers beside Original Layer with the help of remove the Eye symbol.

Step 10

Now select the Frame 2 and select the second layer in layers list and hide visibility of remaining layers.

Step 11

Do the same for all layers Like step 10.

Step 12

now select the looping options shown bottom of animation window and select forever and change the frame delay time to 0.5 Sec.

looping options

looping options

Step 13

Now we have to save the image for web and Devises (Alt + Ctrl + Shift +S).

Select Gif 128 No dither from popup window and press Save.

That’s it Here is our final image.

Final image

Final image

 

Download the original file

Creating Image Poster with text

Creating Image Poster with text

Lets prepare an image which will looks like image prepared by text

Step 1

First we are going to create a new document in Photoshop with 1024×800 pixels with all the default settings.

Fill the background layer with black color.

 

1

 

Step 2

Select Horizontal Type Tool (T) and place any text (white color, caps on, font Arial) filling all background as you can see below. Only use one text layer.

 

image with text

image with text

Rotate the text by 45 Degrees

 

45 degrees rotated image

45 degrees rotated image

Step 3

Open Another image  and copy it to our canvas over text layer.

Go to Edit > Free Transform and resize photo to something similar to what I have.

photo

photo

Step 4

Select text from text layer (Ctrl+left click on text layer thumbnail in layers). Press Ctrl+Shift+I to invert selection. With selection active, select photo layer and press Delete to clear selection contents

final output

 

That’s it you are done.

 

Download the original PSD file here

Download Original PSD